How to Check Floor Drain Pipe Slope Before Moving Toilet
The video was really helpful! I learned that there are a few things to consider before moving the toilet, such as the size of the drain pipe, the distance between the toilet flange and the fitting, and the height of the ceiling.
The video also provides some tips on how to move the toilet if you have enough room. For example, if you have a crawlspace or a basement, you may be able to move the toilet further. If you have a second floor or a third floor, you may not be able to move the toilet as far because the space between the joists is limited.
Bonus tips:
If you have a 3-inch drain pipe, you need to be able to raise the pipe 1/8 inch per foot in order to get the proper drainage.
If you have a 4-inch drain pipe, you need to be able to raise the pipe 1/8 inch per foot in order to get the proper drainage.
If you have a toilet that is not flushing properly, it may be because the drain pipe is not sloping enough.
If you are planning to move the toilet a significant distance, you may need to hire a professional plumber.
Moving a Bathroom Toilet: Installation, Remodeling, and Pipe Slope Considerations
Moving a bathroom toilet, even a short distance, can be a significant undertaking. It often involves plumbing adjustments, especially regarding the drain pipe slope.
Installation Steps
Shut Off Water Supply: Locate the shut-off valves under the sink and toilet. Turn them clockwise until they stop to shut off the water supply.
Flush Toilet: This will remove any remaining water.
Disconnect Water Supply Lines: Use a wrench to loosen and disconnect the water supply lines from the toilet tank.
Remove Old Toilet: Loosen the bolts securing the toilet to the floor. Carefully lift and remove the toilet.
Adjust Drain Pipe: If necessary, adjust the drain pipe to ensure it meets the required slope. You may need to cut and re-join the pipe.
Install New Wax Ring: Place a new wax ring onto the toilet flange.
Reattach Toilet: Align the toilet with the flange and secure it with the bolts.
Reconnect Water Supply Lines: Connect the water supply lines to the toilet tank.
Test for Leaks: Turn on the water supply and check for any leaks around the toilet base or connections.
Remodeling Considerations
Floor Tile Removal: If you're remodeling the bathroom floor, remove the tiles around the toilet base. This will make it easier to adjust the pipe and install the new toilet.
Wall Fixtures: If you're moving the toilet a significant distance, you may need to adjust the location of wall fixtures like the toilet paper holder or towel bar.
Plumbing Permits: In some areas, you may need to obtain a plumbing permit before moving the toilet. Consult your local building department for specific requirements.
Additional Tips
Professional Assistance: If you're unsure about plumbing or remodeling, consider hiring a professional.
Safety First: Always wear gloves and safety glasses when working with plumbing fixtures.
Tools: Have the necessary tools on hand, including a wrench, adjustable pliers, and a utility knife.
Sealants: Use a plumber's putty or a sealant to create a watertight seal between the toilet flange and the wax ring.
